This is an old favourite of mine and have used it sooooo many times for a range of different types of bags. It’s really easy, quick and can be adapted to suit whatever size you want to make (or fabric you have spare!)
You will need:
- Fabric for your outer (here we’ve used Riley Blake’s Promenade Yellow Flower)
- Fabric for your lining (here we’ve used Riley Blake’s Promenade Yellow Spot)
- Small piece Bondaweb
- Coordinating ribbon
- Coordinating thread
- Chalk and a pencil
- Sewing machine, pins and needles
Let’s get started!
1. Cut out your pieces of outer and lining.
Fold your fabric in half, right sides together and cut a rectangle (the size of mine is 14.5 inches x 11 inches). Repeat with your lining fabric so you have four rectangles in total.
2. Add your applique shape to your bag.
- On the paper side of your Bondaweb, draw the shape you want to add to your bag – I’ve decided to draw a pair of pants!
- Place your Bondaweb, glue side down (paper side up) onto the wrong side of a small piece of contrasting fabric – I’m using the same fabric as my lining. Press for a few seconds, until the Bondaweb sticks to the fabric.
- Cut out your shape and peel away the papery backing of the Bondaweb.
- Place your shape (pants) onto one piece of your outer fabric and press, so the shape sticks.
- Using a contrasting colour thread and a small zig zag stitch on your sewing machine, stitch around the shape.
Tip: When you get to the corners of your shape, stop sewing, leave the needle in the fabric, lift the presser foot up and spin the fabric to the direction you need to continue to sew.
- Snip your threads to neaten.
- Here, I’ve decided to add a little bow to my pants. I made the little bow from ribbon and hand stitched it to the outer fabric.
3. Sewing your outer and linings together.
- Place one piece of your outer fabric, right sides together with a piece of your lining fabric.
- Pin across the top (the short side of the rectangle).
- Using a 1/4 inch seam allowance, sew across the top, attaching one piece of your outer fabric with one piece of your lining fabric.
- Repeat the above steps with the other outer and lining piece.
- Press your seams open. You should now have two sides of the bag (made up of one outer and one lining).
4. Sewing your bag together.
- With right sides together, place one side of the bag on top of the other, with the outers facing and the linings facing (so here we have the florals on top of each other, and the spots on top of each other).
- Line up the seam and pin all around the bag.
- Using a ruler, measure 1 inch either side of the seam line and make a chalk mark. Repeat this on either side of the bag.
- Starting at the bottom of the lining, sew all around the bag, stopping and starting at each chalk mark (so you have a gap 2 inches wide over the seam line). Stop sewing about 2 inches before you get to where you started (so you have a gap for turning the bag the right way round). Stay stitch (sew a few stitches forward and backwards) at the beginning and at the end. Snip your threads.
Tip: Use a larger seam allowance on the bottom lining of your bag – this way, the bag lining will fit better inside the outer.
- Trim your excess at the bottom of your lining.
5. Turn your bag the right way round.
- Press the seams open of the gaps you made in the bag.
- Snip all four corners.
- Pull the bag through the gap at the bottom of the lining.
Tip: Use a pencil to poke out the corners.
- Press your bag, paying attention to the gaps, so all the bits that need to be tucked in are!
- Hand sew closed the opening in your lining.
- Push the lining into the outer and press.
- Using a contrasting coloured thread, starting on one side of the channel (the bit where we will be threading the ribbon around the top of the bag), top stitch all around the top of your bag. Stay stitch at the beginning and end.
- Using a safety pin attached to one end of your ribbon, thread it through one opening at the side of your bag and all the way around the top of your bag, through the channel, and out of the other opening on the same side you started. Cut the ribbon and tie the ends together.
- You could finish here and have just one tie, I like to have two, one on either side, so I threaded another length of ribbon around the top of the bag, through the opening on the opposite side of the bag.
Beautiful! You’ve made a little pants bag.
Like the pencil case tutorial we posted a couple of week’s ago, this tutorial is really versatile; you can adapt the size, colours, applique shape and it can have a multiple of uses; I’ve made a number of these for underwear bags, smaller ones for gift bags and larger ones for laundry bags…
Use two contrasting fabrics on the outer and change the applique shape to suit…this bag below is for my mum (Joyce) who asked me to make her another after I gave her one for her birthday and she likes it so much!
Add a pocket…
Felt is GREAT for applique…
Increase the size of your fabric rectangles for a larger laundry bag…
The possibilities are endless…